Yingfu blade saw has been praised by many users since it was put into the market. Only better products can be made to repay you. After years of practice and experience, it makes the multi-blade saw bit by bit improved. The appearance of Yingfu saw is beautiful and easy to operate. The multi-blade saw uses thicker materials, and makes the chassis wider and thicker, so that the multi-blade saw is more stable in work, the machine is more stable and the saw out. The wood will be smooth and tidy, noise will be reduced, bearing, screw and all other parts are using national standard products, multi-blade saw models are complete, but also tailor-made for customers.

Yingfu saw blade maintenance is good, in order to operate smoothly, now woodworking machinery multi-blade saw blade how to maintain!

Maintenance of multi-blade saw blade for square wood:

1. When the rough cutting surface of multi-blade saw is no longer sharp, it must be repaired in time. The precision of dressing should be high so that the original angle and damage can not be changed.

2. If the saw blade of log multi-blade saw is not often used, it should be laid flat or hung up, covered with plastic cloth, and be moistureproof and dustproof to avoid rusting of the saw blade.

3. The internal diameter correction and positioning hole processing of square wood multi-blade saw blade should be handed over to the manufacturer if conditions permit. If it is not processed properly, it will result in unsatisfactory or dangerous use of the product. In principle, the hole enlargement should not exceed 2 cm of the original hole diameter in order to avoid affecting the stress balance.